Error "There was a problem starting ndfapi.dll..."

When booting up a WATCHPAX connected to your network, the following error message appears "There was a problem starting ndfapi.dll. The specified module could not be found".

Problem description:

  • WATCHPAX won't start WATCHOUT on boot up.
  • Error message displays.
  • Replacing with new unit does not help.


ndfapi.dll refers to WINDOWS Network Diagnostic Framework Client API which indicates that something might be wrong in your network setup. Static IP-addresses set from a router might cause this. Disabling this and using DHCP to automatically acquire IP-address will make this error disappear.


Last Updated: 31 maj 2019 15:27